• Home
• Commercial Equipment
• Watering Tools & Hose
• Irrigation Systems
• Sprayers, Foggers, Foamers
• HAF Fans & Thermostats
• Humidity Management
• Specialized Tools
• Livestock Products
• Interiorscape
• Sanitation
• Battery Watering Cart
• Frost Protection
• Dramm YouTube Page
• DRAMMwater
• --
• Learning
• Warranty Registration
• Equipment Service & Repair
• Dramm Forum
• Dramm Blog
• Consumer Products
• Drammatic Organic Fertilizer
• News
• Contact
• Careers
• Privacy Policy
• Search
• Sustainability at Dramm

• Dramm Corporation
  Manitowoc, WI 54220
  USA
  920-684-0227 Phone 800-258-0848 Order

PolyRail Bench Riser Irrigation Support System

The combination of the new JetRain nozzles and Dramm's patented PolyRail system provides the perfect propagation or overhead irrigation system. Designed for use with rolling benches, the Dramm Bench Riser System keeps the nozzles with the bench, ensuring that the pattern is always even, no matter where the bench rolls.



The Bench Riser System utilizes the easy to install PolyRail aluminum extrusion to support PE tubing above the bench. Nozzles are then punched into the PE tubing where they are held rigid by the PolyRail. Aluminum supports are spaced at 12 foot intervals along the bench. Supports are available in 24", 36" and 48" heights and are easily interchangable.

The Bench Riser System performs best when used with Dramm JetRain and JetFog nozzles.



Let Dramm design your system.

Contact us via e-mail or by phone at the numbers listed to the left for more information.

PolyRail 16mm Aluminum Extrusion

PolyRail aluminum extrusion tightly sleeves PE tubing keeping it rigid, without sags. PolyRail keeps nozzles straight and even, ensuring the best coverage for your irrigation system. Installs easily without glue.

ITEM	SIZE	NAME	BROCHURE	MANUAL	SHIP WT.
ALU16	12' section	PolyRail 16mm Aluminum Extrusion	-	-	-

PolyRail 25mm Aluminum Extrusion

25mm (3/4) diameter. For higher flow and more support. 25mm PolyRail may be used to hang baskets

ITEM	SIZE	NAME	BROCHURE	MANUAL	SHIP WT.
ALU25	12' section	PolyRail 25mm Aluminum Extrusion	-	-	-

PolyRail Connecting Band

Connecting band with set screws. 4 length. Connects two rail pieces together.

ITEM	SIZE	NAME	BROCHURE	MANUAL	SHIP WT.
ALU501CB	4 inch	PolyRail Connecting Band	-	-	-

PolyRail Connecting Band

Connecting band with set screws. 14 length. Connects two rail pieces together.

ITEM	SIZE	NAME	BROCHURE	MANUAL	SHIP WT.
ALU50135	14 inch	PolyRail Connecting Band	-	-	-

PolyRail 90 deg Hanger 16mm

Hanger to position PE outlet at a 90_ angle

ITEM	SIZE	NAME	BROCHURE	MANUAL	SHIP WT.
ALU500PH	16mm	PolyRail 90 deg Hanger 16mm	-	-	-

PolyRail 90 deg Hanger 25mm

Hanger to position PE outlet at a 90_ angle

ITEM	SIZE	NAME	BROCHURE	MANUAL	SHIP WT.
ALU500-90	25mm	PolyRail 90 deg Hanger 25mm	-	-	-

PolyRail Top Hanger

Hanger rides on Rail to position PE outlet towards the bottom of the Rail.

ITEM	SIZE	NAME	BROCHURE	MANUAL	SHIP WT.
ALU502H	Top	PolyRail Top Hanger	-	-	-

PolyRail Stop

Stop used at both ends of each irrigation run. Includes set screw.

ITEM	SIZE	NAME	BROCHURE	MANUAL	SHIP WT.
ALU541S	-	PolyRail Stop	-	-	-

PolyRail Punch 25mm

Punch for centering 3mm hole in PE.

ITEM	SIZE	NAME	BROCHURE	MANUAL	SHIP WT.
ALU503A	25mm	PolyRail Punch 25mm	-	-	-

PolyRail Punch 16mm

Punch for centering 3mm hole in PE.

ITEM	SIZE	NAME	BROCHURE	MANUAL	SHIP WT.
ALU509A	16mm	PolyRail Punch 16mm	-	-	-

PolyRail Bench Riser Base

Base for PolyRail Bench Riser Support

ITEM	SIZE	NAME	BROCHURE	MANUAL	SHIP WT.
ALUSB	-	PolyRail Bench Riser Base	-	-	-

PolyRail Bench Riser Cap

Cap for top of PolyRail Bench Riser Support

ITEM	SIZE	NAME	BROCHURE	MANUAL	SHIP WT.
ALUSC	-	PolyRail Bench Riser Cap	-	-	-